Feeding Equipment

Rotary Table Feeder will consist of a power driven circulated plate rotating directly below a hopper / bunker.  A feed collar located immediately above rotating table used in conjunction with an adjustable plough, determines the volume of material discharged.

The lower edge of the feed collar will be parallel to the table with a predetermined gap from table top.  This arrangement permits equal quality of material to flow under the collar and spread over the table as it resolves.  The material is then ploughed off into the discharge chute.

Rotary table feeders are most useful for handling materials that are sluggish, tend to interlock or mat and thereby arch over restricted openings.

Rotary Vane feeders, also known as rotary airlocks or rotary valves, are commonly used in industrial and agricultural applications as a component in a bulk or specialty material handling system. Rotary feeders are primarily used for discharge of bulk solid material from hoppers/bins, receivers, and cyclones into a pressure or vacuum-driven pneumatic conveying system. Components of a rotary feeder include a rotor shaft, housing, head plates, and packing seals and bearings. Rotors have large vanes cast or welded on and are typically driven by small internal combustion engines or electric motors.

Vibrating Feeders provide the most efficient and economical method of conveying bulk materials and, what is more important the simplest and easiest means of controlling the rate of flow or feed.

Vibrating Feeders are extensively used in Iron and Steel works, Collieries Quarries, Gas Works, Mines, Chemicals, Pharmaceuticals, Ceramics, Rubber, Clay and Glass Industries for handling all types of materials – big lumps of ore down to fine chemicals – hot or cold – dry or damp – Capacities from 50 grams to 2000 Tons  per hour.

Vibrating Feeders protect the belt conveyors from damage by feeding the material onto the belt conveyors from storage hoppers, silos, surge hoppers and dumpers at a controlled rate.

This machine feed in other machinery after weighing raw material in its storage area. It is available in different capacities. It is also available in two different measuring control system – Semi-automatic and Automatic system.